Guía

Your screenplays list

Todas las guías

Por ahora, las guías están disponibles solo en inglés.

The screenplays list is where every screenplay you own or work on lives in Beachwood. From it you open a screenplay, start a new one, import one from Final Draft or a PDF, lock it for a breakdown, share it to read, move it into a project, rename it or delete it. You can also open the same list without leaving the editor, from the title bar at the top of the script.

Getting to the list

There are three ways in.

From the sidebar. Click the page icon in the sidebar. When the sidebar is collapsed, hover over the icon and it says Screenplays; when it's expanded, the word sits beside the icon. The icon stays highlighted while you're on the list, and while you're writing in one of your own screenplays.

The collapsed sidebar with the mouse over the page icon, showing the tooltip Screenplays

The expanded sidebar listing Dashboard, Screenplays, Companies, Projects and Messages, with Screenplays highlighted

From the Dashboard's Quick Actions. Choose Open Beachwood.

The Dashboard's Quick Actions card with four buttons: New Script, Open Beachwood, Invite Collaborator and New Project

From the Dashboard's Screenplays card. Choose View all in Beachwood → at its top right. The card itself shows only your most recent screenplays, with a Role column the list doesn't have.

The Dashboard's Screenplays card, with columns for Title, Project, Role and Last edited, and the link View all in Beachwood at its top right

What's on the page

The page is headed Screenplays. At the top right are three buttons: Import Final Draft (.fdx), Import PDF and + New Screenplay. On a phone, they sit just below the heading instead. Below them, a table lists your screenplays, the most recently edited first.

The screenplays list: the heading Screenplays, the buttons Import Final Draft (.fdx), Import PDF and New Screenplay, and a table of six screenplays with columns for Title, Lock, Project, Collaborators and Last edited

The columns are:

  • Title. Click a title, or anywhere on its row, to open the screenplay.
  • Lock. A padlock showing whether the screenplay is locked. See Locking a screenplay below.
  • Project. A blue pill with the project's name when the screenplay belongs to a project, or a gray Unassigned pill when it doesn't.
  • Collaborators. The pictures of the people you share the screenplay with, or a dash when there's no one. Point at a picture to see that person's card; see A collaborator's card.
  • Last edited. How long ago the screenplay last changed.

At the right end of each row are its buttons; see The buttons on a row below.

Sorting. Click the Title, Project or Last edited heading to sort by that column. Click it again to reverse the order. The sort lasts only while you're on the page: when you come back, the list is in last-edited order again.

Load more. If you have a lot of screenplays, the list shows the first batch and a Load more button under the table. Choose it to show the next batch.

Opening a screenplay

Click the screenplay's title or row. A screenplay of your own opens in the Beachwood editor. A screenplay that belongs to a project opens inside that project, with the project's sidebar on the left.

Starting a new screenplay

Choose + New Screenplay. A window asks you to Name your screenplay. Type a title; the Create button becomes available once there's something to create. Choose Create, or press Enter, and the new screenplay opens in the editor, ready to write.

The Name your screenplay window, with the title Night Swimmers typed in the Screenplay title box and a Create button

If the screenplay can't be created, a message says "We couldn't create your screenplay. Please try again." and the window stays open.

Importing from Final Draft or a PDF

Choose Import Final Draft (.fdx) or Import PDF, then pick the file on your computer. A new screenplay is made from it and opens in the editor.

  • If part of the file couldn't be brought across, an Import finished window opens first. It says how many lines were imported and lists what was left out, such as Final Draft elements Beachwood doesn't support yet, or scene numbers it couldn't use. Choose Open screenplay to carry on.
  • If the file is the wrong kind, a message asks you to choose a Final Draft (.fdx) file or a PDF (.pdf) file.
  • If the import fails, a message under the buttons says "We couldn't import that file." Try again, or try a different file.

Locking a screenplay

The Lock column shows an open padlock for an unlocked screenplay. Hover over it to see what it means.

The open padlock in a row's Lock column, with its tooltip: Unlocked — lock the script when it's ready for a breakdown

Lock a screenplay when the script is ready for a production breakdown. Click the open padlock, and a Lock this screenplay? window explains what locking does. Open Things to know about locking a screenplay to read more:

  • Locking doesn't change a word of the script.
  • From then on, each Update Script Breakdown issues the next colored revision. See Update Script Breakdown.
  • You can unlock it at any time. Only the owner or an editor can lock or unlock it.

Choose Apply to lock it. The padlock closes, and its tooltip reads "Locked — changes are issued as colored revision pages".

The Lock this screenplay? window, with its explanation, the expandable Things to know about locking a screenplay, and Cancel and Apply buttons

The buttons on a row

If you own the screenplay, its row has three buttons at the right end. Hover over one to see its name.

  • Update from Final Draft (a page with an up arrow). Replaces the screenplay's contents with a Final Draft file. The window that opens warns that your edits in Beachwood will be overwritten, and that comments on text the file changes or removes will be deleted. Beachwood saves a copy of the current version first, so you can get it back from Version History. Choose Choose .fdx file to go ahead, or Cancel.

    The Update from Final Draft window: a line naming the screenplay, a red warning about edits being overwritten and comments being deleted, a note that a snapshot is saved first, and Cancel and Choose .fdx file buttons

  • Share to read (an open book). Opens the Reader Mode window, where you invite someone to read the screenplay and comment on it. See Reader Mode.

    The Reader Mode window, with boxes for the reader's email and name, a choice of version to share, and Cancel and Send invite buttons

  • Actions (⋯). Opens a menu; see the next section.

The Actions menu

Choose ⋯ on a row for these choices:

  • Open. The same as clicking the row.
  • Move to project. Only for a screenplay that isn't in a project yet.
  • Rename.
  • Delete, in red.

The Actions menu open on a row, listing Open, Move to project, Rename and Delete

Move to project

Choose a project from the list in the window, then Move. The row then shows the project's pill. A screenplay moved into a project starts with no production data: run Update Script Breakdown from the project to build its scenes and breakdown.

The Move to project window, with the project Salt Marsh chosen, a note that the screenplay starts with no production data, and a Move button

Rename

The Rename window has two boxes:

  • Title, the screenplay's name.
  • Code name, optional. It's shown instead of the title to people outside your team. Leave it blank to use the title. See Code names.

Choose Save to keep the change, or Cancel.

The Rename window, with boxes for Title and Code name, the code name marked Optional with a help note, and Cancel and Save buttons

Delete

A window asks "Delete this screenplay? This cannot be undone." If the screenplay belongs to a project, it adds that the screenplay's production data (breakdown, stripboard, scenes, and more) will be permanently deleted too. Choose Delete to delete it, or Cancel.

The delete confirmation for a project screenplay, warning that it cannot be undone and that its production data will be permanently deleted too, with Cancel and Delete buttons

The list inside the editor

While you're writing, you don't have to leave the screenplay to reach the list. The blue bar at the top of the editor shows TITLE: and the screenplay's name. Click it to open a My Screenplays window holding the same list: the same three buttons, the same columns and the same row buttons.

The top of the editor, with the blue bar reading TITLE: Night Swimmers and a pencil at its right, above the editor's toolbar

The My Screenplays window open over the editor, with the three buttons above the table of screenplays and an X at the top right

Click a screenplay to open it; the window closes. To close the window without opening anything, choose the X at its top right, press Esc, or click outside it.

If the list can't load, the window says "We couldn't load your screenplays." with a Try again button.

What collaborators and readers see

An invite waiting for you shows as an amber banner above the table, one for each invite. An invite to work on a screenplay says "You have a pending invite to collaborate on…"; an invite to read one says "You have a pending invite to read…". Each has Accept and Decline. See Accepting or declining an invite to a screenplay.

Two amber banners above an empty list: You have a pending invite to collaborate on The Long Weekend, and You have a pending invite to read Salt Marsh Blues, each with Accept and Decline buttons

If you're a viewer on a screenplay, its row is simpler:

  • The padlock is grayed out. Hovering over it says "Only the owner or an editor can change this", and clicking it does nothing.
  • There's no Update from Final Draft or Share to read button, only ⋯.
  • The ⋯ menu has Open, Rename and Delete, but no Move to project.

The All screenplays and To read tabs above a viewer's row, which has a grayed padlock, two collaborator pictures and only the Actions button

The grayed padlock with its tooltip: Only the owner or an editor can change this

A viewer's Actions menu, listing Open, Rename and Delete

Once you've accepted an invite to read, two tabs appear above the table: All screenplays and To read, with a count of the screenplays waiting for you. To read lists them with their Version, your Progress and when you Last read them. Click one to open it in Reader Mode. See Reader Mode.

The To read tab, with a table showing Salt Marsh Blues: Version Shared 2026-11-18, Progress Not started, Last read 1 minute ago

Things that may surprise you

The list has no Role column. To see whether you're the owner, an editor or a viewer on a screenplay, look at the Role column of the Dashboard's Screenplays card.

The sort arrow doesn't show the direction. The icon beside a sortable heading looks the same whichever way the column is sorted, so look at the rows to tell.

Sorting only reorders what's shown. If the list has a Load more button, sorting arranges the screenplays already loaded, not every screenplay you have.

A viewer can't rename or delete the screenplay, even though Rename and Delete are in their menu. Saving a rename shows the message "Forbidden" and the window stays open.

Last read can show a time for a screenplay you haven't opened. On the To read tab, it counts from when you accepted the invite.

The list doesn't remember the tab. Coming back to the list always opens All screenplays.

You may be asked to upgrade. If your plan's screenplay limit is reached, + New Screenplay and the import buttons open a Screenplay limit reached window with a View plans button instead. Deleting a screenplay frees a place.

¿No encuentras lo que buscas? Pregúntale a Katie, nuestra asistente en la app, o escribe a support@hollywooddisruption.com.